Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Boca Raton?
Metal roof installation in Boca Raton typically runs $18,000 to $42,000 for a full residential tear-off and install, with most single-family homes landing between $24,000 and $33,000. The spread comes down to roof size, panel type, and how much decking and trim work the job needs. A standing-seam job on a straightforward hip roof sits near the low end; a complex roof with multiple valleys, dormers, and exposed fastener detailing pushes toward the top.
We give written, itemized estimates so you can see exactly where the money goes before you commit. If you’ve been told you need a new roof and want a clear number rather than a ballpark, that’s the place to start.
Key Takeaways
- Most Boca Raton metal roof installs fall between $24,000 and $33,000 installed.
- Standing-seam aluminum and steel run higher than exposed-fastener panels.
- Roof pitch, complexity, and decking condition swing the price more than anything else.
- Metal costs more upfront than asphalt shingles but usually lasts considerably longer.
- Free written estimates and an inspection first are the smart way to know your actual number.
Metal Roof Installation Cost Breakdown (2026)
Here’s how a typical Boca Raton metal roof job breaks down by line item. These are estimated ranges for the local market; your written estimate sets the final price.
| Line Item | Typical Range |
|---|---|
| Tear-off and disposal of existing roof | $3,000 – $6,500 |
| Decking repair or replacement (as needed) | $1,500 – $6,000 |
| Underlayment and moisture barrier | $1,800 – $4,200 |
| Metal panels (standing seam) | $9,000 – $20,000 |
| Metal panels (exposed fastener) | $6,000 – $13,000 |
| Trim, flashing, and ridge caps | $2,000 – $4,500 |
| Fasteners and closures | $600 – $1,500 |
| Permit and inspection fees | $400 – $1,200 |
| Labor and installation | $6,000 – $14,000 |
What pushes the number up: a steep or complex roof, more than one layer of old roofing to remove, soft or damaged decking, and premium panel profiles. Standing-seam panels cost noticeably more than exposed-fastener panels because of the concealed fastening system and the tighter installation tolerances. What pulls it down: a simple roof shape with few valleys and dormers, sound decking that doesn’t need replacement, and choosing an exposed-fastener panel where the look suits the house.
Every metal roof we install goes on over a properly prepped deck with a full underlayment system. We work with seven major manufacturers, so we’re not tied to one panel line. We can match the material to your roof and your budget rather than steering you toward whatever a single supplier pushes.
What Affects Metal Roof Installation Pricing in Boca Raton
Pricing in Boca Raton tracks the same fundamentals as anywhere, but the local housing stock and building department shape the details. Here’s what moves the number:
- Roof size and pitch. Square footage is the biggest driver. A steep roof takes more labor and safety setup than a low-slope one, which adds cost even on the same footprint.
- Roof complexity. Valleys, hips, dormers, skylights, and chimney penetrations all add flashing and detailing work. A clean hip roof is cheaper to roof than a cut-up gable roof of the same size.
- Decking condition. Boca Raton’s humidity and heavy summer rains find weak spots in old decking. If we pull the old roof and find soft or delaminated sheathing, it has to be replaced before the metal goes down.
- Number of existing layers. Tearing off two layers of old roofing costs more in labor and disposal than one. Some homes have been re-roofed more than once.
- Panel type. Standing seam with concealed fasteners costs more than exposed-fastener panels. The trade-off is a cleaner look and fewer fastener points to maintain.
- Permits and inspection. Most cities require a permit for a full re-roof, and the work has to pass inspection. Ask your city’s building department what applies to your address, and budget for the fee and the inspection timeline.
Standing Seam vs. Exposed Fastener: What’s the Price Difference?
Standing-seam metal typically costs $14 to $22 per square foot installed in Boca Raton, while exposed-fastener panels run $9 to $14 per square foot installed on a comparable roof. The gap reflects the concealed fastening system, tighter panel tolerances, and the extra skill standing seam demands.
Standing seam is the better choice when appearance and long-term maintenance matter. Its fasteners are hidden, so there are no exposed screws to back out or washers to fail over time. Exposed-fastener panels are a solid, practical option for outbuildings, sheds, and homes where the look suits the architecture. We install both and can walk you through the trade-offs on your actual roof rather than in the abstract.
Is a Metal Roof Worth the Cost Compared to Shingles?
A metal roof costs more upfront than asphalt shingles but usually lasts significantly longer and needs less maintenance. In Boca Raton’s heat and heavy summer rain, that durability matters. Metal reflects heat rather than absorbing it the way dark asphalt does, and it doesn’t degrade the way shingles do under years of sun and downpour.
The honest math: shingles cost less on day one, metal costs less over the life of the roof. If you plan to stay in the home long term, metal often makes more sense. If you’re preparing to sell soon, the upfront gap may not pay back in your time frame. Our roof inspection service gives you a documented condition check before you decide, so you’re choosing on facts rather than a gut feeling. That’s the “know before you spend” part of how we work.
How to Save on Metal Roof Installation
You can’t cut the fundamentals without cutting quality, but a few moves keep the total down without regret:
- Fix the deck, don’t skip it. Replacing soft decking now prevents leaks and callbacks later. A cheap install over failing sheathing costs more in the long run.
- Choose exposed-fastener panels where the look works. They cost less per square foot than standing seam and perform well when installed correctly.
- Do the whole roof at once. Phase-two work costs more than a single full replacement, so if you know the roof is due, plan one project rather than two.
- Handle small penetrations early. Consolidating skylights or removing an unused chimney penetration reduces flashing and detailing work.
- Get a written estimate and compare line items. Apples-to-apples comparisons catch hidden costs before you sign.
We offer free estimates with itemized pricing, so you see the breakdown, not just a lump sum. Call (866) 942-9891 to schedule an inspection and get your number. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Start with a Roof Inspection Before You Price Metal
A metal roof is a big line item, and the smartest way to know your actual cost is to get the roof looked at first. Our roof inspection service gives you a documented condition assessment, so you know whether the roof needs a full replacement, a targeted repair, or just a watch on a problem area. “Know before you spend” is the whole point: you shouldn’t price a replacement until you know what the roof actually needs.
If inspection finds the roof still has life left, a repair may be the better call. If it’s due, you’ll have the information to plan a replacement on your terms. Either way, you make the decision with real information rather than a sales pitch. That’s how a roofing contractor should work, and it’s why we cover inspection, repair, and full replacement under one roof. If the scope changes mid-project, you don’t have to bring in a second contractor. For a closer look at what we do across the area, see our Benchmark Roof Repair page.
What Does Metal Roof Installation Involve?
A metal roof installation is more than laying panels. The job runs through clear stages, and each one affects the final price:
- Inspection and measurement. We assess the existing roof, measure the footprint, and note penetrations and problem areas.
- Tear-off and disposal. The old roofing comes off, and we inspect the decking underneath.
- Decking repair. Any soft or damaged sheathing is replaced before the new roof goes down.
- Underlayment. A moisture barrier goes over the deck to shed water that gets past the panels.
- Panel installation. Panels are set, fastened, and seamed according to the manufacturer’s requirements.
- Trim and flashing. Ridge caps, valleys, and penetrations are sealed and detailed.
- Final inspection. The work is checked against the permit and manufacturer specs.
Each manufacturer has its own installation requirements, and getting them right matters for the product warranty. That’s why we install across GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral product lines. Fluency across those systems means we follow the right spec for whichever panel you choose, rather than forcing every roof into one manufacturer’s playbook.
Does a Metal Roof Installation Require a Permit in Boca Raton?
Most cities require a permit for a full re-roof, and Boca Raton is no exception. Permit rules vary by address and scope, so check with the city’s building department before work starts, and build the permit and inspection cost into your budget. A licensed, insured contractor handles the permit process and the inspection, and we do both. Never hire a roofer who suggests skipping the permit to save money; it puts the work and your home at risk.
FAQs – Metal Roof Installation Cost
How much does metal roof installation cost in Boca Raton in 2026?
Most Boca Raton metal roof installations run $24,000 to $33,000 for a typical single-family home, with a full range from about $18,000 to $42,000 depending on roof size, panel type, and decking condition. Call (866) 942-9891 for an exact quote; estimates are free.
Is a metal roof cheaper than shingles in Boca Raton?
No, metal costs more upfront, typically $9 to $22 per square foot installed versus roughly half that for asphalt shingles. Metal usually lasts considerably longer and needs less maintenance, so it often costs less over the life of the roof. Call (866) 942-9891 and we’ll compare both options on your roof.
How long does metal roof installation take?
A typical Boca Raton home takes three to seven days from tear-off to final inspection, with larger or more complex roofs running longer. Weather and decking repairs can extend the timeline. Call (866) 942-9891 to schedule an inspection and get a timeline for your roof.
Can you install a metal roof over my existing shingles?
We don’t recommend it, and most metal panel manufacturers specify installation over a properly prepped deck. Roof-over jobs can trap moisture and shorten the roof’s life, which is a real concern in Boca Raton’s humidity. A full tear-off typically adds $3,000 to $6,500. Call (866) 942-9891 for a firm number.
Is it cheaper to repair or replace a roof with metal?
A repair costs far less in the short term, often $500 to $2,500 for a targeted fix, while a full metal replacement runs $18,000 to $42,000. If the roof has years of life left, repair is the smarter call; if it’s near the end, replacement avoids repeated spending. Call (866) 942-9891 and our inspection tells you which side of that line your roof is on.
Get Your Metal Roof Estimate
Metal roof pricing in Boca Raton comes down to your roof, your panel choice, and the condition we find under the old roofing. We give free, itemized estimates so you know the number before you commit, and we back the work with a written scope you can hold us to. From inspection to installation, we handle the whole job with one crew, so you’re never caught between two contractors mid-project.
Call (866) 942-9891 for a free estimate on your metal roof in Boca Raton. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 15 years of experience, we’re licensed and insured, and we set the benchmark on every roof we install.
Pricing reflects the Boca Raton market as of 2026. Benchmark Roof Repair offers free estimates – call (866) 942-9891.
What Our Customers Say
"Leak over the kitchen turned out to be a cracked boot around a vent pipe, not the roof itself. He showed me the photo from up there and replaced the boot for a couple hundred dollars. The company before him had quoted a full tear off."
- Chris Hoffman"Storm took part of the ridge off at night. They tarped it the same evening so the rain didn't get in, and did the real repair the following week."
- Tara Novak"Added a ridge vent and cleared the blocked soffit vents. Attic temperature in the summer dropped noticeably and the upstairs is livable now."
- Terrence Bryant